Author: Peter Bjoerk
ELT 2
ELT 2 is a general LoRaWAN™ device for measuring analog or digital signals. ELT 2 can, for example, be used together with electricity meters, flow meters, analog sensors, moisture sensors, temperature sensors, water leak cable. It is enclosed in an IP65 box and is designed to be outside. Inside the ELT 2 you will find four internal sensors: a temperature sensor, a humidity sensor, an accelerometer for orientation measurements. and an atmospheric pressure sensor. A 3,6V AA lithium battery powers it. The Battery life is estimated to be up to 10 years but depends on sample interval, transmit interval, data rate, power output, and environmental factors. You are welcome to use our online battery lifetime calculator.
All Elsys’s sensors are equipped with NFC (Near Field Communication) for easy configuration with an Android phone. With our application “Sensor Settings”, you can change the sample rate, data rate, encryption keys, triggers, activation and much more. All of our software is built on top of the LoRaWAN™ stack from Semtech.
Channel plans exist for US902-928, EU863-870, AS923, AU915-928, KR920-923. ELT Lite is the lite version of ELT2.
Specification
- Analog 0-10V in
- Digital in
- Pulse counter
- Direct connection to S0 outputs
- Direct connection to Decagon moisture sensors
- Direct connection to external temperature sensor
- Direct connection to distance sensor (ultrasonic)
- Embedded sensors for temperature and humidity.
- Embedded sensors for acceleration and pressure sensor.
- Water leak sensor input
- NFC for easy configuration
- Size: 94 x 59 x 35 mm
- Max output power: +20dBm
- Approx. range: 12km*
- Battery life: 10 years**
- 3.6V AA lithium battery
- US902-928, EU863-870,AS923,AU915-928,KR920-923
* LoRa™ modulation SF10
** Depending on interval
Supported external sensors:
- Analog input (0-10V)
- Pulse input (pullup/pulldown), e.g. power meters.
- DS18B20, 1-wire temperature sensor
- Switch/Button, normally open
- Digital input
- Meter 10HS,EC-5, water moisture sensor*
- Water leak sensor/cable
- Maxbotix, ultrasound distance sensor*
- GPS, with serial output*
Do you miss support for any sensor? Get in touch, and we can probably solve it.
Connections ELT Lite
Powered analog input
Analog input (0-10V), input signal between input and ground. +3V present at B+ pin.
Select “Analog input” in android application “Sensor Settings”. Select “Eternal startup time” in “Sensor Settings” and configure ON-time for sensor. External startup time is how long the sensor will be powered before sampling value. ELT input is internally pulled down and the input impedance is 7.4 kΩ
Pulse count (pull down)
Pulse count input, input signal between input and B+. Select “External startup time” in “Sensor Settings” and configure ON-time for always on that is >1000000ms.
Select “Pulse input(pull down)” in android application “Sensor Settings”. ELT input is internally pulled down by ~50 kΩ*.
*For lower values, e.g. if there are long cables, this can be adjusted with an external resistor in parallel.
ELT Lite
ELT Lite is a general LoRaWAN™ device for measuring analog or digital signals. ELT Lite can, for example, be used together with electricity meters, flow meters, analog sensors, moisture sensors, temperature sensors, water leak cable. It is enclosed in an IP65 box and is designed to be outside. A 3,6V AA lithium battery powers it. The Battery life is estimated to be up to 10 years but depends on sample interval, transmit interval, data rate, power output, and environmental factors. You are welcome to use our online battery lifetime calculator.
All Elsys’s sensors are equipped with NFC (Near Field Communication) for easy configuration with an Android phone. With our application “Sensor Settings”, you can change the sample rate, data rate, encryption keys, triggers, activation and much more. All of our software is built on top of the LoRaWAN™ stack from Semtech.
Channel plans exist for US902-928, EU863-870, AS923, AU915-928, KR920-923. ELT LIte is the lite version of ELT2. ELT2 has internal sensors and one more input channel.
Specification
- Analog 0-10V in
- Digital in
- Pulse counter
- Direct connection to S0 outputs
- Direct connection to Decagon moisture sensors
- Direct connection to external temperature sensor
- Water leak sensor input
- NFC for easy configuration
- Size: 94 x 59 x 35 mm
- Max output power: +20dBm
- Approx. range: 12km*
- Battery life: 10 years**
- 3.6V AA lithium battery
- US902-928, EU863-870,AS923,AU915-928,KR920-923
* LoRa™ modulation SF10
** Depending on interval
Supported external sensors:
- Analog input (0-10V)
- Pulse input (pullup/pulldown), e.g. power meters.
- DS18B20, 1-wire temperature sensor
- Switch/Button, normally open
- Digital input
- Meter 10HS,EC-5, water moisture sensor*
- Water leak sensor/cable
Do you miss support for any sensor? Get in touch, and we can probably solve it.
ERS Eye
ERS Eye is a LoRaWAN™ sensor for room occupancy detection. ERS Eye is designed to be mounted on the ceiling and senses when somebody is using the room (standing/sitting). It can be used for dynamic workplace management, facility management and workplace statistics. The sensor also measures temperature, humidity and light. ERS Eye is powered by two 3,6V AA lithium battery. The Battery life is estimated to be up to 5 years but depends on sample interval, transmit interval, data rate and environmental factors. You are welcome to use our online battery lifetime calculator. All Elsys sensors are equipped with NFC (Near Field Communication) for easy configuration with an Android phone. With our application “Sensor Settings“, you can change sample rate, data rate, encryption keys, triggers, activation and much more. All parameters can also be changed over the air from the server. All our sensors are built on the LoRaWAN™ stack from Semtech. Channel plans for US902-928, EU863-870, AS923, AU915-928, KR920-923
Specifications ERS Eye
- LoRa Alliance Certified
-
Temperature
-
Humidity
- Light
- Occupancy (body sense)
-
NFC for easy configuration
- Over the air configuration
-
Size : 86x86x26mm
-
Accuracy: ± 0.5°C, ±2%rh
-
Resolution: 0.1°C, 0.1%rh
-
Approx. range: 8km*
-
Battery life: 5 years**
- US902-928, EU863-870, AS923, AU915-928, KR920-923
- 2 x 3.6V AA lithium battery
* LoRa™ modulation SF10
** Depending on interval
ERS Desk
ERS Desk is a LoRaWAN™ sensor for measuring desk occupancy. ERS Desk is designed to mount under the desk and senses when somebody is using the desk (standing/sitting).It can be used for dynamic workplace management, facility management and workplace statistics. The sensor also measures temperature humidity and light. ERS Desk is powered by two 3,6V AA lithium battery. The Battery life is estimated to be up to 5 years but depends on sample interval, transmit interval, data rate and environmental factors. You are welcome to use our online battery lifetime calculator. All Elsys sensors are equipped with NFC (Near Field Communication) for easy configuration with an Android phone. With our application “Sensor Settings“, you can change sample rate, data rate, encryption keys, triggers, activation and much more. All parameters can also be changed over the air from the server. All our sensors are built on the LoRaWAN™ stack from Semtech. Channel planes for US902-928, EU863-870, AS923, AU915-928, KR920-923
Specifications ERS Desk
- LoRa Alliance Certified
-
Temperature
-
Humidity
- Light
- Occupancy (body sense)
-
NFC for easy configuration
- Over the air configuration
-
Size : 86x86x26mm
-
Accuracy: ± 0.5°C, ±2%rh
-
Resolution: 0.1°C, 0.1%rh
-
Approx. range: 8km*
-
Battery life: 5 years**
- US902-928, EU863-870, AS923, AU915-928, KR920-923
- 2 x 3.6V AA lithium battery
* LoRa™ modulation SF10
** Depending on interval
Installation
Android video
Simple Write
Write multiple sensors
Programming kit
The programming kit is a tool for upgrading Elsys sensors with new or custom firmware. It can be used with all of our sensors. The kit includes ST-link programmer, adapter card, cables and spring probes.
Test Switch
No function leave in off mode, reserved for future use
Power Switch
- ON 3.3V power from ST-LINK programmer (no battery in sensor)
- OFF Power from sensor (battery) or external power supply
Screw terminals
External power supply to the sensor 3-3.6V. Do not need to be connected for normal use
Programmer connection